Installation of Microwave sensor:
Just open a small round hole in the lamp with a diameter of 5mm to expose the rod antenna.
As shown in the following figure.
Application of Microwave sensor:
1. Automatically ON/OFF function:
| With sufficient daylight,even when motion detected,light remains OFF. |
| With insufficient daylight,when motion detected,light ON. |
| After the last detection,and the present hold time elapsed,light OFF. |
2. No daylight function
When the daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
| When motion is detected, the sensor will switch on the light to 100% brighteness. |
| After people leave the detection area, light remains 100% brightness within hold time. |
| After the last detection and the present hold time elapsed, light OFF. |
Wiring diagram of Microwave sensor:
|
| Control mode | ON/OFF |
| Connection type | Amphenol connector(L,N,N,L') |
| Stand-by power | ≤0.5W |
| Microwave frequency | 5.8GHz±75MHz |
| Motion detection | 0.5~1.5m/s |
| Microwave power | <0.3mW |
| Operating voltage | 220-240VAC 50Hz/60Hz |
| Switch capacity | External induction head; Max.400W(Control gear); Max.800W(Incandescent lamp) |
Mechanical structure of Microwave sensor:
|
| Certificate | RoHS CE |
| Detection area | 10%/50%/75%/100% |
| Setting mode | By DIP switch |
| Hold time | 5s/90s/5min/15min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Mounting height | 2.5-4m/8.2-13.12ft (ceiling mounted) |
| Detection range | ø4-10m/13.12-32.8ft (ceiling mounted) |
| Temperature | -20°C~+55°C |
| Warranty | 5 years |
| IP grade | IP 20 |
Setting of Macirowave sensor:
|
|
| Detection area: In this area,movement will be detected and able to trigger the sensor.100% detection area is also known as the strong sensitvity. |
|
| Hold time: The period of light keeping 100% brightness after moving objects leave the detection area. |
| Daylight threshold: Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable",the sensor works everytime it detects motion regardless the ambient brightness. |
Features of ON/OFF Sensor:
1. Liner design,easy to install
2. Setting parameters by 6 DIP switch is very convenient
3. Plug-in terminals are easy to install on customer lamps
4. Obtain SAA,CE,RoHS certificate,can cooperate with lamps to do the whole lamps certification
5. The driver voltage shall be stable and float within 10%
