120V 240VAC Microwave Motion Sensor Driver Remote Control Setting
120-240VAC Slim LED Driver & Microwave Sensor 2-in-1 Detector 6mHx14mD Tri-proof Light
HT20V-I is a 120-240VAC LED Driver & Microwave Sensor 2-in-1 Isolated Solution with Detahced & Slim Design with 30-50V Output Voltage and 6m(H) x 14m(D) Mounting Height and Detection Range, Remote Control Settings
Features:
1. Remote Control Setting.
2. Slim & Detached design for Tri-Proof light.
3. Abnormal protection SCP: Auto recovery, OVP, OCP, OTP.
4. Output Voltage 30-50VDC, Current 0.4A Max., Power 12-20W.
5. Max. mounting height x detection range: 6M x 14M.
6. Efficiency of 70%
Product Description
| Input voltage | 120~240VAC 50/60Hz |
| Input current | 0.4A Max |
| Input power | 20W Max |
| Detection area | 25% / 50% / 75% / 100% |
| Hold time | 5s/30s/ 1min/3min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection angle | 30°-150° |
| Mounting height | Max.6m |
| Detection range | Max.ø14m |
| Output LED current | 0.4A Max. |
| Output LED voltage | 30-50V |
| Output LED power | 20W Max. |
| Empty load voltage | ≤70V |
| Power factor | ＞0.9 |
| Efficiency | 70% (Max.) |
| Operating temperature | Ta: -20°C+50°C Tc: 80°C |
| Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
| EMC standard | EN55015 |
| Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
| IP rating | IP20 |
| Life time | 30,000 hours |
| Warranty | 3 years |
Detection Range
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
Detached Module with a remote control to set all parameters
With two DIP switch poles to choose different output current
With two installation hole, easily fixed to the lighting fixture for end user.
Wiring diagram
Two poles to connect with power supply (220-240VAC)
Two poles to connect with LED Light
Dimensions (mm)
Application Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux"
With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.
3. Function Demo - Dimmable control/Corridor function
With sufficient daylight, With insufficient After last detection, After the stand-by
even when motion daylight, when motion light will be dimmed period, light OFF.
detected, light remains detected, light ON. down to the stand-by
OFF. dimming level (10% or
30%) after holdtime.
HT20V-I.pdf
Product Tags:
|
|
120V 240VAC Microwave Motion Sensor Driver Remote Control Setting Images
|
