AC Solution Emergency Battery Backup For LED Luminaire With Optional Infrared Remote Control
Description
- AC solution EM for 9-350W LED luminaire.
- It must connect 0/1-10V dimming wires if power of luminaire>power of EM.
Features
- UL listed for field or factory installation, CEC title 20 compliant
- Compliance with American NFPA 101 life Safety Code
- Constant output power
- 2-in-1 LED test switch and indicator light included
- Manual testing via remote control(optional)
- Monthly/annual self-testing
- With multi-protection function:
-Battery overcharge protection
-Battery over-discharge protection
-Output overload protection
-Short-circuit protection
-Open load protection
ELECTRICAL SPECIFICATIONS
| Input voltage | 100-347 VAC 50/60Hz |
| Input Current | 0.1A max |
| Input Power | 8W Max |
| Power Factor | 0.6@100VAC,0.5@347VAC |
| Input of LED load | AC 6A Max |
| Output Voltage | 140Vdc |
| Battery | Lithium |
| Recharge duration | <24Hrs |
| Emergency duration | 90mins |
| Ambient temp | 0-50°C(32℉-122℉) |
MODEL SELECTION TABLE
| Models | | | ES-EIA25-01S | ES-EIA25-01S | ES-EIA25-01S |
| Emergency wattage | 9W | 15W | 25W | 32W | 38W |
| Battery capacity | 14.8V/1800mAh | 14.8V/600mAh | 14.8V/4400mAh | 14.8V/5200mAh | 14.8V/6600mAh |
| Compatible led fixture | 9-80W LED lamp with 0-10V dimming or LED lamp less than 9W without 0-10V dimming | 15-120W LED lamp with 0-10V dimming or LED lamp less than 15W without 0-10V dimming | 25-200W LED lamp with 0-10V dimming or LED lamp less than 25W without 0-10V dimming | 32-300W LED lamp with 0-10V dimming or LED lamp less than 32W without 0-10V dimming | 38-350W LED lamp with 0-10V dimming or LED lamp less than 38W without 0-10V dimming |
DIMENSION
| Model | L | W | H |
| ES-EIA09-01S | 14.6＂(371mm) | 1.62＂(41.4mm) | 1.43＂(36.4mm) |
| ES-EIA15-01S | 14.6＂(371mm) | 1.62＂(41.4mm) | 1.43＂(36.4mm) |
| Model | L | W | H |
| ES-EIA25-01S | 2.24＂(311mm) | 2.59＂(66mm) | 1.53＂(39mm) |
| ES-EIA32-01S | 12.24＂(311mm) | 2.59＂(66mm) | 1.53＂(39mm) |
| ES-EIA38-01S | 12.24＂(311mm) | 2.59＂(66mm) | 1.53＂(39mm) |
NORMAL MODE
Fixtures will operate normally when power is available. When an outage occurs, the fixture will switch to emergency mode, delivering power to the fixture for up to 90 minutes.
EMERGENCY MODE
1.The emergency battery backup enters the emergency mode immediately after the mains power failure.
2.Stop the emergency and return to the charging state after the mains power call.
SELF-TEST
MONTHLY SELF-TEST
It will automatically perform a monthly self-test every 30 days with a duration of 30S to check whether the emergency function is normal, and automatically restore to normal charging after 30S discharged.
ANNUAL SELF-TEST
An annual self-test will be done every year(12 months) with a duration of more than 180mins to check whether the capacity of the battery pack is normal, and automatically restore to normal charging after fully discharged. (the condition of annual test is that the battery pack is fully charged). If the annual inspection is interrupted, it will be retested after recovery and when the test conditions are met. (Possibility of interruption: such as sudden power failure, sudden manual test).
ES-EIA-01S.pdf
Product Tags:
|
|
Optional Infrared Remote Control AC Solution Emergency Converter For LED Luminaire Images
|
